FX loop alternative

To the left is the previously posted alternative loop modification schematic to change a Mesa Dual Rectifier from a parallel loop to a serial loop.  It’s easy.  Most of the time required for the mod is spent taking the amp apart.  (Here’s a link to a 2 Channel Recto with the same mod.)

The following pictures are provided to show the inside of the amp, the job, and a crappy job someone did of soldering the output transformer to the daughter board.  I used a 22 gauge wire with the insulation removed for a clean, short jumper.  I’ve seen people use insulation for the job, but the space is tiny.  Note that my solder joints look a little matte.  This is from the lead-free, silver solder I used.  Almost every joint looks that way when I use it, no matter what, but it hasn’t been a problem.

Update July 2016: Verified.

Before any work.

Before any work.

Side shot before any changes.

Side shot before any changes.

Jumpered.

Jumpered.

Jumpered, side view.

Jumpered, side view.

Taped off the wires.

Taped off the wires.

Someone did an ugly, poor job on the OT.

Someone did an ugly, poor job on the OT.

Funky!

Funky!

Ah, the lovely glow.

Ah, the lovely glow.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s