Posts Tagged ‘boss’

HarmonicI like this boosted filter.  The 400 Hz peak is accompanied by a 3.2 kHz peak of a smaller amplitude.  This accents the 4th Harmonic, which is consonant.   (more…)

GE7signalflow

Basics of the Signal Path

The input to the Boss GE-7 Graphic EQ has a buffer which is active at all times.  There is a slight emphasis around 2 kHz to help the guitar sound stand out.  Immediately after the buffer is the amplifier for the level control.  It’s a differential type with only one source voltage split with the level’s sliding potentiometer.  This slider will either boost or cut the whole signal when it is moved from the zero line.  From here, the signal is split; one path goes to the EQ section and one part goes to the positive input of another differential amp.  The EQ section feeds the negative input of the differential amp. (more…)

I put together a rudimentary representation of the effect on filter curves when setting a graphic EQ.  It isn’t exact.  Use it to get a general idea for the way a graphic EQ shapes the signal. (more…)

Blank Settings Form For Boss GE-7

Using an equalizer to boost the guitar’s input signal makes a lot of sense.  It provides a clean gain and a lot of headroom.  Aside from boosting the signal, it can, of course, be used to carve out specific frequencies.  Unlike most overdrive pedals, an equalizer has the ability to be very precise with multiple frequency bands and can create special effects.

The downside to this specific pedal is noise.  It uses cheap tantalum capacitors in the signal path.  This creates a hissing sound when the sliders are moved away from the zero mark.  The MXR 10 Band EQ is reputedly better, but I don’t own it and can’t comment about it further. (more…)